Table Of Contents - Toro 30393 Operator's Manual

Introduction
The debris blower is mounted to a ride-on machine which
is intended to be used by professional, hired operators in
commercial applications. It is primarily designed to use wind
power to quickly clear large areas of unwanted debris on
well-maintained lawns in parks, golf courses, sports fields,
and on commercial grounds.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
© 2014-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Before Operating .................................................... 3
While Operating...................................................... 3
Maintenance ........................................................... 3
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 6
1 Mounting the Castor Wheel.................................... 6
2 Mounting the Debris Blower to the Traction
Unit ................................................................... 7
3 Adjusting the Link Assembly .................................. 7
4 Greasing the Blower .............................................. 8
5 Installing the Front Weight ..................................... 8
Product Overview .........................................................11
Specifications ........................................................11
Attachments/Accessories........................................11
Operation ....................................................................11
Adjusting the Discharge Opening .............................11
Switch Operation ...................................................11
Operating Tips.......................................................12
Maintenance .................................................................13
Lubrication............................................................13
Bearing Alignment..................................................13
Torquing Fasteners .................................................14
Servicing the Castor Arm Bushings ...........................14
Servicing the Castor Wheels and Bearings ..................15
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved