Table of Contents
Advertisement
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Net weight
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Operation
Adjusting the Discharge
Opening
The discharge opening (Figure 7) is adjustable to increase
107 kg (235 lb)
or decrease air output velocity and volume. Decreasing the
discharge opening size increases the velocity.
1. Loosen discharge opening deflector mounting screws
1. Discharge opening
deflector
2. Pivot the deflector to the desired opening.
3. Tighten the mounting screws.
Switch Operation
Lift/Lower switch (Figure 8) — Move switch to the Lift
position to raise the attachment and to the Lower position to
lower the attachment.
Float/Power-down Switch (Figure 8) — Moving the switch
to the Float position allows the attachment to follow the
contour of the ground. Moving the switch to the Power-down
position adds weight from the machine to increase ground
engagement force. Higher ground engagement force
decreases the traction capacity of the machine.
Important: Only run the debris blower in the Float
mode. Never run it in the Power-down mode, or damage
to the blower will occur.
11
(Figure 7).
2
Figure 7
1
G003812
2. Mounting screw
Advertisement
Table of Contents
