Maintenance; Recommended Maintenance Schedule - Toro 74410 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After First 8 Hours
Each Use
Every 5 Hours
Every 25 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 300 Hours
Every 500 Hours or at
Storage
Before Storage
1
More often in dusty, dirty conditions
Maintenance Procedure
• Check the hydraulic fluid level.
• Change the engine oil.
• Change the hydraulic filter.
• Check the engine oil level.
• Check the safety system.
• Clean the engine air intake
• Clean the mower housing.
• Check the cutting blades.
• Service the foam air cleaner
• Check the battery electrolyte.
• Check the hydraulic fluid level.
• Grease the brake lever.
• Oil the linkage bushings
• Grease the mower support and push arms.
• Grease the blade spindle bearings.
• Grease both idler pulley pivots.
• Grease the front wheels.
• Check the tire pressure.
• Check the belts for wear and cracks.
1
• Change the engine oil .
• Service the paper air cleaner
• Check the spark plug(s).
• Check the hydraulic lines.
• Change the hydraulic filter.
1
• Change the oil filter .
• Replace the fuel filter.
• Grease the brake lever pivot.
• Clean the cooling system
• Replace the paper air cleaner
• Adjust and grease the caster pivot.
• Adjust the wheel hub slotted nut.
• Perform all the maintenance procedures listed above before storage.
• Drain the gasoline.
• Charge the battery and disconnect the cables.
• Paint any chipped surfaces.
25
1
.
1
.
1
.
1
.
1
.
1
.