Operation; Traction Unit Overview; Controls - Toro Dingo 320-D Operator's Manual

Operation

Traction Unit Overview

Note: Determine the left and right side of the machine from the normal operating position.
Figure 11 contains a front and back view of the traction unit. Familiarize yourself with all of the traction unit components
listed in Figure 11.
6
4
5
3
2
1
1. Mount plate
2. Tilt cylinder
3. Auxiliary hydraulic couplers
4. Loader arms
5. Front access cover
Caution
You could fall off of the platform and be seriously
injured during operation.
Do not move the control levers unless you are
standing with both feet on the platform and your
hands are holding the handles.
Caution
If you operate the traction unit with out the
covers or guards in place, you could be seriously
injured by moving parts.
Do not operate the traction unit with any of the
covers or guards opened or removed.
17
6
18
7
11
10
8
Figure 11
6. Fuel tank
7. Wheel
8. Lift cylinder
9. Operator platform
10. Rear access cover (open)
15
14
13
19
12
9
18
11. Engine
12. Air filter
13. Control panel
14. Lift points
15. Handle

Controls

Become familiar with all the controls (Fig. 12) before you
start the engine and operate the traction unit.
1
3
6
m–4388
Figure 12
1. Traction control levers
2. Attachment tilt lever
3. Loader arm lever
4. Auxiliary hydraulics lever
16
14
4
16
16. Battery
17. Indicator lights
18. Tow valves
19. Parking brake lever
5
4
2
7
8
5. Speed selector lever
6. Throttle lever
7. Key switch
8. Hour meter