Product Overview; Controls - Toro 22337CP Operator's Manual

Product Overview

5
4
3
2
1
1. Mount plate
2. Tilt cylinder
3. Auxiliary hydraulic couplers
4. Loader arms
5. Front access cover
6. Fuel tank

Controls

Become familiar with all the controls (Figure 7) before
you start the engine and operate the traction unit.
6 3 1
G006057
1. Traction control levers
2. Attachment tilt lever
3. Loader arm lever
4. Auxiliary hydraulics lever
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
17
20
7. Wheel
8. Lift cylinder
9. Operator platform
(removable counterweight
not shown)
10. Rear access cover (open)
11. Engine
12. Air filter
5 2 4
7 8
Figure 7
5. Speed selector lever
6. Throttle lever
7. Key switch
8. Hour meter
14
13
22
19
6
12
8
18
11
21
7
9
18
10
Figure 6
13. Control panel
14. Lift points
15. Handle
16. Battery
17. Indicator lights
18. Tow valves
• To start the engine, rotate the key to the run position,
the glow plug light will come on. When the glow
plug light turns off, turn the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
• To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Traction Control Levers
• To move forward, move the traction control levers
forward. To move rearward, move the traction
control levers rearward.
• To go straight, move both traction control levers
equally.
• To turn, move the lever located on the side you
want to turn back toward the neutral position while
keeping the other lever engaged.
14
15
14
16
G005939
19. Parking brake lever
20. Radiator fill cap
21. Thigh support
22. Flow divider control
4