Maintenance; Recommended Maintenance Schedule(S) - Toro 22337CP Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 75 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 600 hours
Every 1,500 hours
Yearly
Yearly or before storage
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Replace the hydraulic filter.
• Torque the wheel lug nuts to 50 ft-lb (68 N⋅m).
• Change the engine oil and filter.
• Drain water from the fuel filter.
• Check the engine oil level.
• Check the engine coolant level.
• Remove debris from the traction unit.
• Test the parking brake
• Check the tire pressure.
• Grease the traction unit.
• Check for loose fasteners.
• Check the hydraulic fluid level.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Change the engine oil and filter (more frequently when operating conditions are
extremely dusty or sandy).
• Check the battery electrolyte level. (Replacement battery only)
• Check the battery cable connections.
• Torque the wheel lug nuts to 50 ft-lb (68 N⋅m).
• Replace the primary air filter.
• Replace the hydraulic filter.
• Replace the safety air filter.
• Replace all moving hydraulic hoses.
• Change the fuel filter.
• Change the hydraulic fluid.
• Touch up chipped paint
26