Maintenance; Recommended Maintenance; Schedule(S) - Toro 30411 Groundsmaster 4100-D Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the rst 10
operating hours
After the rst 50
operating hours
After the rst 200
operating hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 2 years
Maintenance Procedure
• Torque the wheel lug nuts.
• Check the fan and alternator belt tension.
• Check the blade drive belt tension.
• Change the engine oil and lter.
• Check the engine RPM (at idle and full throttle).
• Torque the locknuts on the pivots.
• Change the front planetary gear oil.
• Change the rear axle oil.
• Change the hydraulic oil.
• Change the hydraulic oil lters.
• Check the engine oil level.
• Check the coolant level.
• Check the hydraulic uid level.
• Check the tire pressure.
• Lubricate all grease ttings.
• Inspect the air cleaner.
• Check the battery level and cable connections.
• Check the blade drive belt tension.
• Clean the underside of the mower housing and under the belt covers.
• Inspect the cooling system hoses.
• Check the fan and alternator belt tension.
• Change the engine oil and lter.
• Torque the wheel lug nuts.
• Service the spark arrestor.
• Check the planetary gear drive oil.
• Check the rear axle lubricant.
• Check the rear axle gear box lubricant.
• Service the air lter (if the indicator shows red).
• Inspect the fuel lines and connections.
• Change the fuel lters (fuel/water and prelter).
• Check the engine RPM (at idle and full throttle).
• Drain and clean the fuel tank.
• Change the front planetary gear oil.
• Change the rear axle oil.
• Check the rear wheel toe-in.
• Inspect the blade drive belts.
• Change the hydraulic oil.
• Change the hydraulic oil lters.
• Inspect the cutting unit castor wheel assemblies.
• Check and adjust the valve clearance.
• Replace the safety switches.
• Flush the cooling system and replace uid.
• Replace moving hoses.
33