Setup; Installing The Seat, Seat Belt, And Manual Tube - Toro 30411 Groundsmaster 4100-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Seat kit (obtain separately)
Seat suspension kit (obtain
separately)
Manual tube
1
R-clamp
Seat belt
Bolt
Lock washer
2
No parts required
Operator's Manual
Engine Operator's Manual
Parts Catalog
3
Operator Training DVD
Pre-delivery Inspection Sheet
CE certicate
Note: Determine the left and right sides of the
machine from the normal operating position.
Step
1
Installing the Seat, Seat
Belt, and Manual Tube
Parts needed for this step:
1 Seat kit (obtain separately)
1 Seat suspension kit (obtain separately)
1 Manual tube
2 R-clamp
1
Seat belt
2 Bolt
2 Lock washer
Procedure
The machine is shipped without the seat assembly.
The Deluxe Seat, Model No. 30398, and Seat
Suspension Kit, Model No. 30396 or the Premium
Seat, Model No. 30622, and Premium Suspension
Description
Kit, Model No. 30621, must be purchased and
installed.
1. Mount the manual tube to the seat suspension
2. Install the seat belt to each side of the seat with
3. Slide the seat completely forward and backward
14
Qty.
1
1
1
Install the seat, seat belt, and
2 manual tube.
1
2
2
–
Grease the machine.
1
1
Read the manuals and watch the
1
DVD before operating the machine.
Use the remaining parts for the
1
installation of attachments.
1
1
with the 2 R-clamps included in loose parts.
a bolt and lock washer, supplied in loose parts.
Important: Make sure that the seat
switch wire is connected to the seat switch
connector on the harness.
to ensure proper operation and that seat switch
wires and connectors are not pinched or do no
contact any moving parts.
Use