Data Cable; Sync - Nokia 6710 Navigator User Manual

6. Select the device with which you want to connect. If the
other device requires pairing before data can be
transmitted, you are asked to enter a passcode.
When the connection has been established,
displayed.
The Sent folder in the Messaging application does not store
messages sent using Bluetooth connectivity.
To receive data using Bluetooth connectivity, select
Bluetooth On and My phone's visibility
>
all to receive data from a non-paired device or
receive data from a paired device only. When you receive data
through Bluetooth connectivity, depending on the settings
of an active profile, a tone sounds, and you are asked if you
want to accept the message in which the data is included. If
you accept, the message is placed in the Inbox folder in the
Messaging application.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically after
sending or receiving data. Only Nokia Ovi Suite and some
accessories such as headsets may maintain a connection even
if not actively used.

Data cable

To avoid damaging the memory card or corrupting data, do
not disconnect the USB data cable during a data transfer.
© 2009 Nokia. All rights reserved.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the USB data cable. Always
Sending data is
connect the data cable first to your device, and then to
the other device or computer.
2. When the device asks which mode to use, select
storage. In this mode, you can see your device as a
removable hard drive in your computer.
Shown to 3. Transfer data between the computer and your device.
>
Hidden to
4. End the connection from the computer (for example, from
an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card.
To transfer images from the device to a compatible PC, or to
print the images stored in the device on a compatible printer,
connect the USB data cable to the PC or printer, and select
Image
To modify the USB mode settings, select
Connectivity
To change the USB mode you normally use with the USB data
cable, select
To set the device to ask which mode to use each time you
connect the USB data cable to the device, select
connection
To use Nokia Ovi Suite with your device, install Nokia Ovi Suite
on your PC, connect the USB data cable, and select

Sync

Select
transfer.
> USB.
USB connection mode.
> Yes.
Settings Connectivity
> >
Mass
Settings
> >
Ask on
PC Suite.
> Sync.
69