Network Settings; Call Barring - Nokia 6710 Navigator User Manual

If not available — Divert calls if you have an active call,
●
do not answer, or the device is switched off or out of
network coverage.
To divert calls to your voice mailbox, select a call type, a
diverting option, andOptions
mailbox.
To divert calls to another phone number, select a call type, a
diverting option, and Options
number. Enter the number, or select
number saved in Contacts.
To check the current diverting status, scroll to the diverting
option, and select Options
To stop diverting calls, scroll to the diverting option, and
select Options > Deactivate.

Call barring

Select Settings
> >
barring.
You can bar the calls that can be made or received with the
device (network service). To change the settings, you need
the barring password from your service provider. Call barring
affects all call types.
To bar calls, select from the following:
Outgoing calls — Prevent making voice calls with your
●
device.
Incoming calls — Prevent incoming calls.
●
International calls — Prevent calling to foreign countries
●
or regions.
Incoming calls when roaming
●
when outside your home country.
© 2009 Nokia. All rights reserved.
Activate To voice
> >
Activate To other
> >
Find to retrieve a
Check status.
>
Settings and Phone
>
— Prevent incoming calls
International calls except to home country
●
calls to foreign countries or regions, but allow calls to your
home country.
To check the status of voice call barrings, select the barring
option and
To deactivate all voice call barrings, select a barring option
and Options
To change the password used for barring voice, fax, and data
calls, select
current code, then the new code twice. The barring password
must be four digits long. For details, contact your service
provider.

Network settings

Select
Network.
Call To select the network mode, select
mode, UMTS, or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select
Manual to select from available networks, or
set the device to select the network automatically.
Options Check status.
>
Deactivate all barrings.
>
Options Edit barring
>
Settings Settings
> >
Network mode
UMTS enables faster data transfer, but
Dual mode
Operator selection
— Prevent
password. Enter the
and Phone
>
and Dual
may cause constant
and
Automatic to
25