Offline Profile; Power Saver - Nokia 6710 Navigator User Manual

HSPA is supported and available (network service).
The icon may vary between regions.
the connection is active.
connection is on hold.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
All calls are forwarded to another number.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
Your device is synchronising.
The GPS indicator shows the availability of the
satellite signals. One bar is one satellite. When the
© 2009 Nokia. All rights reserved.
indicates that
indicates that the
device receives enough data from the satellites to
calculate your location, the bar turns green.
Other indicators may also be displayed.

Offline profile

Important: In the Offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
To quickly activate the Offline profile, press the power key
briefly, and select Offline.
To switch to another profile, press the power key briefly, and
select a profile.
When the Offline profile is active, all connections that use
radio frequencies are closed. However, you can use your
device without the SIM card and listen to the radio or music.
Remember to switch off your device when wireless phone use
is prohibited.

Power saver

Select Settings > Settings.
>
To set the screen saver settings, select
Personalisation Display
>
Power saver time-out
●
device is inactive before the power saver is activated.
General
>
and from the following:
— Set the length of time that the
15