Make A Call; Voice Dialling; Call Waiting - Nokia 6710 Navigator User Manual

Make a call

To make a call, enter the phone number, including the area
code, and press the call key.
Tip: For international calls, add the + character that
replaces the international access code, and enter the
country code, area code (omit the leading 0, if
necessary), and phone number.
To end the call or cancel the call attempt, press the end key.
To make a call using the saved contacts, open the contacts.
Enter the first letters of the name, scroll to the name, and
press the call key.
To make a call using the log, press the call key to view up to
20 numbers that you last called or attempted to call. Scroll to
the desired number or name, and press the call key.
To adjust the volume of an active call, use the volume keys.
To switch from a voice call to a video call, select
Switch to video call. The device ends the voice call and
makes a video call to the recipient.

Call waiting

You can answer a call while you have another call in progress.
To activate call waiting (network service), select
Settings Settings and
>
To answer the waiting call, press the call key. The first call is
put on hold.
To switch between the two calls, select Swap. To connect an
incoming call or a call on hold with an active call and to
disconnect yourself from the calls, select
© 2009 Nokia. All rights reserved.
Options
Phone Call Call waiting.
> >
Options
>
Transfer. To end the active call, press the end key. To end
both calls, select

Voice dialling

Your device supports enhanced voice commands. Enhanced
voice commands are not dependent on the speaker's voice,
so you do not need to record voice tags in advance. The device
creates a voice tag for the entries in the contacts, and
compares the spoken voice tag to it. The voice recognition in
the device adapts to the main user's voice to recognise the
voice commands better.
The voice tag for a contact is the name that is saved for the
contact. To listen to the synthesised voice tag, select a contact
and Options
>
and select Options
Make a call with a voice tag
>
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
>
1. To start voice dialling, in the home screen, press and hold
the right selection key. If a compatible headset with the
headset key is attached, press and hold the headset key
to start voice dialling.
2. A short tone sounds, and
clearly the name that is saved for the contact.
Options End all calls.
>
Voice tag details. Scroll to a contact detail,
Play voice tag.
>
Speak now is displayed. Say
21