Removing The Bearing - Yamaha KT100SEC Owner's Service Manual

DISASSEMBLING THE ENGINE
2. Remove:
Bolt (crankcase)
●
3. Remove:
Right crankcase
●
Make sure the crank separating tool
parallel with the crankcase.
Crankcase separating tool:
90890-01135
CAUTION:
Take care so that the oil seal lip is not damaged.
4. Remove:
Left crankcase
●
Crankshaft assembly
●
Make sure the crank separating tool
parallel with the crankcase.
Crankcase separating tool
90890-01135
CAUTION:
Take care so that the oil seal lip is not damaged.

REMOVING THE BEARING

1. Remove:
Bearing
●
For removal of the bearing, two kinds of tools
are available. Choose the appropriate one
depending on how the bearing is installed.
Fixed on the outside→Bearing puller
Fixed on the inside → Bearing puller
4-8
ENG
body is
body is