Panasonic U-26PE1U6 Technical Data & Service Manual page 183

6-62. Final Procedure
Reinstall the removed part to be placed in its original position.
(See the section "6-57. Preparation Before Installation".)
Then install the accessory supplied side covers (L/R) on both
sides of the indoor unit.
Attach the supplied side plates.
Insert the side plates in the direction of the arrow and fix
them with 2 screws once you've removed.
Attach the accessory supplied side covers.
Slide the covers from the front side and attach to the claws of
the latches.
Tighten the screws (accessory supplied).
Attach the air-intake grille.
When attaching the air-intake grille, perform the reverse
procedure to removing the grille.
Refer to the section "6-57. Preparation Before Installation".
Be sure to attach the safety string.
Close the air-intake grille and fix the claws of the latches with
the screws.
Safety string
Side plate
Screw
Attach
Side cover (accessory supplied)
Screw (accessory supplied)
Fig. 1-205
Fig. 1-206
6-63. Accessories Supplied with Unit
(Ceiling)
Part Name Figure
Special
washer
Drain insulator
Flare insulator
Clamper
Clamper
Hose band
Screw
Part Name Figure
Side cover (R)
Side cover (L)
Full-scale
installation
diagram
Part Name
Wire cover
Screw
Part Name
Operating
Instructions
Installation
Instructions
Warranty
card
Use 3/8" (M10) for suspension bolts.
Field supply for suspension bolts and nuts.
1-175
1. Specifications
Q'ty Remarks
For temporarily
4 suspending indoor unit
from ceiling
2 For drain hose joint
1 For gas tube joint
1 For liquid tube joint
4 For flare insulator
1 For wiring
For drain hose
1
connection
2 For side cover (L/R)
Q'ty Remarks
(Packed in carton box)
1
For right side
(Packed in carton box)
1
For left side
For positioning
1
installation
Figure Q'ty Remarks
1 For control box
1 For wire cover
Figure Q'ty Remarks
1
1
1
1