Panasonic U-26PE1U6 Technical Data & Service Manual page 166

<Procedure of CZ-RTC3 /CZ-RTC5>
Stop the system before performing these steps.
1 Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD display.
2 Press the or
If you wish to see the next screen instantly, press the
or button.
Select "8. Detailed settings" on the LCD display and press
the button.
1
The "Detailed settings" screen appears on the LCD display.
3 Select the "Unit no." by pressing the
for changes.
4 Select the "Code no." by pressing the
Change the "Code no." to "5D" by pressing the
button (or keeping it pressed).
5 Select the "Set data" by pressing the
button.
Select one of the "Set data" in "Table for DC Fan
Motor Tap Setting" by pressing the
Then press the
, and buttons
button to see each menu.
or
or
or
or button.
button.
6 Press the
The "Exit detailed settings and restart?" (Detailed setting-
end) screen appears on the LCD display.
Select "YES" and press the
* If air-blocking material is used, use same procedure as
in steps 3~6 above and change the setting for Code
no."62" to "0000".
If you wish to change the selected indoor unit, follow the step 2.
<Procedure of CZ-RTC4>
Stop the system before performing these steps.
1 Press and hold the
simultaneously for 4 seconds or longer.
2 If group control is in effect, press the
button
this time, the fan at the indoor unit begins and select the
address (unit No.) of the indoor unit operating.
3 Designate the item code
Setting /
4 Press the timer time
setting data.
* For item codes and setting data, refer to "Table for DC Fan
button.
Motor Tap Setting ".
or
5 Press the
(The display stops blinking and remains lit, and setting is
completed.)
* If air-blocking material is used, use the same procedure as in
steps 3 – 5 above and change the setting for item code "62"
to "0000".
If you wish to change the selected indoor unit, follow the step 2.
6 Press the
display.
1-158
1. Specifications
button.
button.
, and buttons
button to set. At
by adjusting the Temperature
buttons.
/ buttons to select the desired
button.
button to return to normal remote controller
°
°
A