Samsung CLX-9201 Service Manual page 130

3. Disassembly and Reassembly
5. Unplug the ITB connector from the right. Pull the
holder to the front.
6. Remove 2 screws.
3-10
7. Pull out the ITB unit until the green handles are shown
totally. Change your grip and release the ITB unit
perfectly.
8. Before install the new ITB unit, align the CAM
position. (Align 2 arrows)
9. Install the new ITB unit. And then install the ITB
cleaner. (Note : Less than torque 6kgf.cm)
Copyright© 1995-2013 SAMSUNG. All rights reserved.