3.3.28.5. DADF motor_solenoid_clutch
1. Remove the DADF cover. (Refer to 3.3.28.1)
2. Unplug all connectors on the DADF board.
3. Remove 1 screw.
4. Remove 2 screws.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
5. Lift up and release the DADF Frame Main after
removing 2 screws.
6. Release the harness holder after removing 2 screw.
7. Unplug the connector. Remove 4 screws. And release
the motor.
3. Disassembly and Reassembly
3-47