H1-Xxxx Type (Dcf) Error Code - Samsung CLX-9201 Service Manual

4. Troubleshooting

4.5.3. H1-xxxx type (DCF) error code

► Error Code
H1-1311
H1-1312
H1-1313
H1-1314
H1-1315
H1-1317
H1-1318
► Error message
Paper jam in Tray 3.
► Symptom
Paper jam has occurred in tray3. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor
is defective.)
► Troubleshooting method
1) Open the DCF Take Away-Cover. Remove the jammed paper.
2) Remove tray3. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray3.
3) If this jam error occurs frequently, check the rollers below.
a) Remove the tray3 and tray4.
b) Check if the pick up/ reverse/ forward rollers are assembled correctly.
c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A).
4) If pick up/ reverse/ forward rollers have no problem, check the following.
a) Remove the DCF pick up unit1. Check if the feed sensor cable is connected correctly.
b) Check if the sensor cable on DCF board is connected correctly.
4-119 Copyright© 1995-2013 SAMSUNG. All rights reserved.