Transition Module Preparation and Installation
5.4
Rear Panel Connectors
The rear panel port connectors on the CPCI-6115-MCPTM are listed in
Figure 5-2 on page
Table 5-1 CPCI-6115-MCPTM Rear Panel Connectors
Type
Serial Ports
5.5
On-Board Connectors and Headers
The following table lists the connectors and headers on the CPCI-6115-MCPTM. Use the links
in the Location column to find the connector descriptions and pin assignments or jumper
settings.
Table 5-2 On-Board Connectors and Headers
Connector/Header
CPCI-6115-MCPTM IDE CompactFlash Connector (J1)
CPCI-6115-MCPTM PMC I/O Module 1 - Host I/O Connector (J10)
CPCI-6115-MCPTM PMC I/O Module 2 - Host I/O Connector (J20)
CPCI-6115-MCPTM PMC I/O Modules 1 & 2 - PMC I/O (J14/J24)
CPCI-6115-MCPTM CompactPCI User I/O Connector (J3)
CPCI-6115-MCPTM CompactPCI User I/O Connector (J5)
CPCI-6115-MCPTM 10/100/1000BaseTx Connectors
COM1 Header (J6)
COM2 Header (J11)
CompactFlash Selection Header (J2)
92
91. Refer to
Table 5-10 on page 100
Number
J25
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
for connector pinout information.
Description
Routed to four RJ-45 connectors for COM1, COM2, COM3,
and COM4 connections (MXP version). Note: COM3 and
COM4 are not used.
Rear Panel Connectors
Table 5-1
and shown in
Location
Table 5-3 on page 93
Table 5-4 on page 94
Table 5-5 on page 95
Table 5-6 on page 96
Table 5-7 on page 97
Table 5-8 on page 98
Table 5-9 on page 100
COM1 and COM2
Asynchronous Serial
Ports Jumpers on page
102
COM1 and COM2
Asynchronous Serial
Ports Jumpers on page
102
CompactFlash Jumper
on page 102