Sharp UP-600 Service Manual page 25

How to exit the program.
You can exit the program by pressing the ENTER key when the
final test pattern is shown on screen or by pressing the CANCEL
key during checking.
5)-2. Pole Display Check
Checking
The screen shows the following test patterns in the order given
below. Press ENTER to move to the next pattern.
i. The following test patterns are displayed.
DOT DISPLAY : 0 1 2 3 4 5 6 7 8 9 ; A a B b C
7SEG DISPLAY : 0 . 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . - .
ii. The test pattern where all digits are turned ON is displayed.
Display
POLE Display Check
How to exit the program.
You can return to the Diag. submenu by pressing the ENTER key
after the 2nd test pattern where all digits are turned ON has been
displayed. Or press the CANCEL key to erase the screen to exit
the program.
5)-3. Popup Display Check
Checking
The screen shows the following test patterns in the order given
below. Press ENTER to move to the next pattern.
i. The following test patterns are displayed.
7SEG DISPLAY : 0 . 1 . 2 . 3 . 4 . 5 . 6 .
ii. The test pattern where all digits are turned ON is displayed.
Display
POPUP Display Check
How to exit the program
You can return to the Diag. submenu by pressing the ENTER key
after the 2nd test pattern where all digits are turned ON has been
displayed. Or press the CANCEL key to erase the screen to exit
the program.
5)-4. PRINTER Check
Checking
The printer prints on the RECEIPT/JOURNAL PRINTER.
Display
PRINTER Check
JOURNAL/RECEIPT print
"Z" 24 digits are printed in 3 lines.
RECEIPT
ZZZZZZZZZZZZZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZZZZZZZZZ
LOGO
How to exit the program
One second after printing is completed, the screen returns to the
PRINTER Check of the DISPLAY & PRINTER MENU.
5)-5. PRINTER CG Check
Checking
The printer prints the built-in CG onto the RECEIPT/JOURNAL
PRINTER.
For standard characters are printed in 16 characters/line and ex-
tended ASCII characters (enlarged characters) are printed in 8
characters/line.
The standard characters are printed first, followed by the ex-
tended ASCII characters.
Check the outputted print to see if CG is correctly printed.
Display
PRINTER CG Check
How to exit the program.
Press the CANCEL key to exit the program after 1 cycle of printing
is performed.
JOURNAL
ZZZZZZZZZZZZZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZZZZZZZZZ