Sharp UP-600 Service Manual page 15

No Procedure on P.C. side
11 Execute "02FD.EXE" on P.C.
*Don't execute the other Software at the same time.
12 Set the Communication method by "Setting" Button.
Push "OK" Button.
13 Push "Transmit Start" Button.
And Select the Sending File.
14 Communication starts.
15 DownLoad is completed.
The initial Window is shown.
Push "Exit" Button.
3. NOTE FOR HANDLING OF LCD
•
The LCD elements are made of glass. BE careful not to give them
strong mechanical shock, or they may be broken. Use extreme
care not to break them.
•
If the LCD element is broken and the liquid is leaked, do not lick it.
If the liquid is attached to your skin or cloth, immediately clean with
soap.
•
Use the unit under the rated conditions to prevent against damage.
•
Be careful not to drop water or other liquid on the display surface.
•
The reflection plate and the polarizing plate are easily scratched.
BE careful not to touch them with a hard thing such as glass,
tweezers. Never hit, push, or rub the surface with hard things.
•
When installing the unit, be careful not to apply stress to the LCD
module. If an excessive stress is applied, abnormal display or
uneven color may result.
No Procedure on UP-600 side
14 UP-600 shows
RECEIVING
15 DownLoad is completed.
The SETTING menu is shown.
16 Execute " Service Reset " on UP-600
00000