Edit Forms - NEC 2400 Integration Manual

Example: If you wanted option 4, SETUP, from the MCI User Interface Main Menu
shown in Figure 2-2., press 4 on the keypad. After you press 4, you see the
SETUP form appear on the screen as shown in Figure 2-3..
SETUP
Figure 2-3. The Setup Form
The SID uses menus to organize all options and functions into categories. Menus
also permit the user to navigate easily through the forms by pressing one or more
keys.
Each type of form requires you to use different keys on the keypad to make
selections and enter information. The table below shows you what keys to use
with the menu forms.
Key
1,2,3,4,5,6,7,8,9,0
*,#
Func
Mode
Arrows
Enter

Edit Forms

Edit forms allow you to use the keypad to enter information into the SID's
configuration. There are three types of edit forms:
Single Item
Two Item
Scroll Item
This section contains descriptions and examples of each type of edit form and
provides you with instructions for using the forms.
1-Params 2-Ports
4-Advanced
Action
Select menu option
No action
Return to main menu
No action
No action
No action
The Switch Integration Device Software
3-Clear
Issue 2 December 1995
2-5