Using Metrics Mode; Clearing Statistical Information - NEC 2400 Integration Manual

Using Metrics Mode

Use the following instructions to use the Metrics monitor mode.
1. Access the View menu as described in the previous section.
2. Press
3. Press
METRICS
This display updates occasionally, showing performance measurements for both
the SID's call processing and message waiting activities. The top line shows a
running average for the number of calls serviced by the INTUITY System per
hour. The bottom line shows a similar statistic for the number of message waiting
commands serviced by the SID per hour. Use the Metric mode to monitor the
performance characteristics of your integrated system.

Clearing Statistical Information

The SID accumulates data that supports the Statistics and Metrics views. You
may wish to purge the data to begin taking new measurements, especially when
you add subscribers to the system, analog voice mail ports, or change your
usage habits. To clear the data, use the following instructions.
1. Log into security level 1. For instructions on logging in to the security level,
refer to Chapter , "NEAX 2400 Switch Administration", in this document.
2. Press
3. Press
key, you see the following message on the screen:
Clearing Statistics...
The SID clears all statistical information. After a few seconds, the display clears
and the SID returns to the View menu.
.
MODE
to select the Statistics
4
Calls/Hr:
MWIs/Hr:
at the VIEW action form.
MODE
to select Clear and remove the old statistics. After you press the
5
Using Metrics Mode
opt ion. You see the following screen:
12001
9071
Issue 2 December 1995
B-5