Instructions List; How To Use The Instruction List - Mitsubishi Electric 700 Series Programming Manual

3.23 Instructions List

3.23.1 How to use the instruction list

Instruction
Classification
Symbol
Transfer
↑
1)
1)....... Classifies the instruction by application.
2)....... Indicates the instruction symbol used for programming.
The instructions are based on 16-bit data instructions.
Example
• Add P to the end of the instruction to define it as executed only on the
leading edge of the preceding condition.
Example
Instruction executed continuously
while preceding condition is on
3)....... Indicates the symbol used in the ladder diagram.
MOV S
Destination:..............................................Indicates
Source: ....................................................Indicates the source of the data for
Symbol
MOV
MOV
MOVP
MOVP
↑
2)
MOV
↓
16-bit transfer instruction
MOV
↓
D
Indicates destination.
Indicates source.
Indicates instruction symbol.
Processing
S D
(S) → (D)
S D
↑ ↑
3) 4)
Instruction executed only on leading
edge of preceding contact condition
S1
WAND
operation result.
the operation.
Instructions List
Execution
Condition
↑
5)
MOVP
↓
S2 D
Indicates destination.
Indicates source.
Indicates instruction symbol.
the destination
Number
of Steps
5
↑
6)
of the
3
103