Mitsubishi Electric PURY-P200YLM-A(1) Service Handbook page 184

[6-5 Making Interlock Settings from an MA Remote Controller ]
<1. Registration procedure>
Set the address of the indoor unit to be interlocked with the LOSSNAY unit using the
5
buttons. (01 to 50)
.
After setting, press the
6
operating the
LOSSNAY or OA processing unit address
Indoor unit address
ON
Press the
7
OFF
- Registration end display
The indoor unit address and "IC" and LOSSNAY address and "LC" are alternately displayed.
- Registration error display
If the address is not registered correctly, the indoor unit address and [
LOSSNAY and [
Cannot be registered because the registered indoor unit or LOSSNAY does not exist.
Cannot be registered because another LOSSNAY was registered at the registered indoor unit.
HWE1314A
button and set the Lossnay address you want to register by
and buttons. (01~50)
. .
button, and register the set indoor unit address and LOSSNAY address.
] are alternately displayed.
- 173 -
and
. .
], and the registered
GB