Ma Simple Remote Controller - Mitsubishi Electric PURY-P200YLM-A(1) Service Handbook

[6-5 Making Interlock Settings from an MA Remote Controller ]
6-5-3

MA Simple Remote Controller

Make this setting only when interlocked operation with LOSSNAY is necessary with
CITY MULTI models.
Perform this operation when you want to register the LOSSNAY, confirm the registered units,
or delete the registered units controlled by the remote controller.
The following uses indoor unit address 05 and LOSSNAY address 30 as an example to describe
the setting procedure.
[Setting Procedure]
Stop the air conditioner using the remote controller
1
Press and hold down the
2
display shown below appears. The remote controller confirms the registered LOSSNAY
addresses of the currently connected indoor units.
Registration confirmation result
3
- The indoor unit address and registered LOSSNAY address are displayed alternately.
<Indoor unit address and indoor unit display>
- When LOSSNAY is not registered.
If registration is unnecessary, end registration by pressing and holding down the
4
buttons at the same time for two seconds.
.
If a new LOSSNAY must be registered, go to step 1. Registration procedure.
If you want to confirm another LOSSNAY, go to step 2. Confirmation procedure.
To delete a registered LOSSNAY, go to step 3. Deletion procedure.
HWE1314A
ON
OFF
and buttons at the same time for two seconds. The
.
<LOSSNAY address display and LOSSNAY display>
- 172 -
button.
and
GB