Table of Contents
Advertisement
4.3.3
Probe mounting distances - liquids
Probe distance
• Observe nozzle length (Probe should lead into the product).
• Observe minimum distance between two probes, and to the metal vessel wall.
Correct
Probe leads into the prod-
uct
Wrong
Nozzle too long
4.4
Solids applications
4.4.1
LCS100 compact version
Observe:
• General distances of the probe, see Probe mounting distances - solids (Page 20).
• Distance to material flow (filling)
• Max. permitted mechanical load, see Environmental (Page 65).
• Wearing due to abrasive bulk material
SITRANS LCS100 I/O Link Version
Operating Instructions, 05/2023, A5E52382716-AA
CAUTION
Installing/mounting
4.4 Solids applications
17
Advertisement
Table of Contents
