Pioneer SX-P830 Operating Instructions Manual page 74

TROUBLESHOOTING
RADIO BROADCASTS
Broadcasts are in- °
audible or hard to
hear.
The antenna isn't connected.
The antenna's orientation is incorrect.
You are using other electrical appli-
ances (fluorescent lamps, dryer, etc.).
Connect an antenna correctly.
Adjust the direction of the antenna.
Stop using the appliances causing the
interference.
The broadcast is in
stereo, but the
receiver plays it in
mono.
OTHER
The timer doesn't © The current clock time hasn't been set. ¢ Set the current time properly.
operate.
The MONO indicator is lighted in the
Use the remote control unit to press
receiver's display.
the FM MONO/RANDOM button so that
the MONO indicator goes out.
The remote control
unit doesn't work.
The sound field
processor (sound
® The remote control unit's batteries are
dead.
e A fluorescent lamp is shining too close
to the remote signal receiver.
¢ The EFFECT ON/OFF button has been
set to OFF.
Insert new batteries.
Move the fluorescent lamp away.
Press the EFFECT ON/OFF button to
ON.
image controller)
doesn't work.
<Multivoltage model only >
When using the °
vocal cancel func-
tion with micro-
phone mixing,
distorted sound is
recorded.
The cassette deck's APSC button is set | ¢
Set the APSC button to OFF.
to ON.
Random noise may }j ¢
be heard when the
microphone is
used with the vo-
cal cancel
function.
Electrical appliances (fluorescent light, °
hair drier, etc.) are used.
Stop using the equipment that
produces the random noise.
74
<ARE1252>
En