Copy By Button Operation - Sony DVS-9000 User Manual

3
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob
1
2
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see "Copy and Swap" (page 402).
4
To copy, press [Copy], and to swap, press [Swap].
This carries out the copy or swap.
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap was carried out.

Copy by Button Operation

You can carry out the following copy operations by a simple button operation.
• M/E copy
• Keyer copy
• Wipe copy
• DME wipe copy
Note
On the CCP-6224/6324, it is not possible to carry out a copy by button
operation.
Basic button operation
The basic button operation is to hold down the copy source button, then press
the destination button.
You can undo the last operation using [Undo] in the menu (see page 407).
Parameter Adjustment
Left No Select data for copy/swap
source
Right No Select data for copy/swap
destination
Setting values
a)
1 to 4
b)
1 to 16
a)
1 to 4
b)
1 to 16
Copy and Swap Operations
407