Sony DVS-9000 User Manual page 634

To change the light to a ring shape
Note
If you select Parallel or Whole (see page 631) in the <Spot Mode> group and
shaping is disabled, the Ring parameter cannot be set.
1
2
To rotate the ring
1
2
To invert the lighted area
Press [Light Invert], turning it on.
The lighted area is inverted.
634
DME Special Effect Operations
Knob Parameter Adjustment
5 Speed Rotation direction and speed
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
Press [Ring], turning it on.
Set the following parameter.
Knob Parameter Adjustment
1 Offset Offset from center position (radius)
2 Radius Radius of ring
3 Angle Rotation angle of ring
a) –1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the
clockwise direction.
Note
There is no Radius setting when Line is selected in the <Spot Mode>
group.
Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring] was selected changes.
Set the following parameter.
Knob Parameter Adjustment
3 Speed Rotation speed and direction
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
Setting values
a)
–100.00 to +100.00
Setting values
–6.00 to +6.00
0.00 to 6.00
a)
–8.00 to +8.00
Setting values
a)
–100.00 to +100.00