Split Fader; Independent Key Transitions With A Simple Transition Module - Sony DVS-9000 User Manual

Split Fader

What does "split fader" mean?
The term "split fader" refers to the function of carrying out a transition with the
fader lever split into left and right halves, so that the background A and
background B buses can be manipulated separately.
To use the split fader, the following conditions must be met.
• The fader lever is in bus fixed mode. (See "Settings Relating to Video
• The necessary settings have been made in a Setup menu to enable the split
• A background is selected for the next transition.
• For the transition type, [MIX] or [NAM] is selected.
Split fader operation
The two halves of the split fader lever correspond to the buses as follows.
Right fader lever: Background A bus
Left fader lever: Background B bus
The relationship between the positions of the two fader levers and the image
output in a mix is as follows.
Left lever position Right lever
Top
Bottom
Top
Bottom
Center
• When the transition type is NAM, the outputs of the A bus and B bus in the
• The transition indicators always show the progress of the background A bus.
• The operation of the left lever and that of the right lever can be swapped. (See
Independent Key Transitions With a Simple Transition
Module
You carry out independent key transition operations using the independent key
transition control block (simple type). This controls only keys 3 and 4.
However, each key button can be assigned to any key in setup (see "Overall
Control Panel Settings (Config Menu)" in Chapter 19 (Volume 3)).
198
Simple Transition
Switching (Transition Menu)" in Chapter 20 (Volume 3).)
fader (See "Settings Relating to Video Switching (Transition Menu)" in
Chapter 20 (Volume 3).)
position
Top
Top
Bottom
Bottom
Center
above table are the outputs subjected to NAM.
"Operation Settings (Operation Menu)" in Chapter 19 (Volume 3).)
A bus output B bus output
100% 0%
100% 100%
0% 0%
0% 100%
50% 50%