Setting And Canceling A Macro Attachment - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Setting a macro attachment to a fader lever

You can set a macro attachment to any particular position of a fader lever in the

transition control block.

• In macro-only mode it is not possible to set a macro attachment.

• It is not possible to set a macro attachment to a fader lever in the keyframe

• For a split fader, you can set a macro attachment to the main split fader.

For details of a split fader, see "Split Fader" in Chapter 3 (Volume 1).

Clearing the macro attachments

You can clear all of the macro attachments in a single operation.

Displaying the macro attachment list

You can display the macro attachment settings in the form of a list in the menu

display to check them.

Setting and Canceling a Macro Attachment

Setting a macro attachment to a button

This section describes the example of setting a macro attachment for the

background A row cross-points.

See "Setting a macro attachment to a button" (page 889) for the buttons for

which a macro attachment can be set.

Macro Attachment Assigning

control block or downstream key control block.

Recall the macro register you want to assign to the button.

For details of recall, see page 850.

To set in pre macro mode, hold down the [PRE MCRO] button in the cross-

point control block, and to set in post macro mode, hold down the [POST

MCRO] button, and then press the desired button in the background A row.