Transporting; Before Loading; Loading And Unloading - Honda F220 Owner's Manual

TRANSPORTING

BEFORE LOADING

If the engine has been running, allow it to cool for at least 15 minutes
before loading the tiller on the transport vehicle. A hot engine and
exhaust system can burn you and can ignite some materials.
Always turn the engine switch to the OFF position. Make sure to turn
the fuel valve OFF.

LOADING AND UNLOADING

If a suitable loading ramp is not available, two people should lift the
tiller on and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie
the tiller down with rope or straps. Keep the tie-down rope or straps
away from the controls, adjustment levers, cables, and the carburetor.
The handlebar can be folded either front or back so the tiller will take
up less space (see page 19).
Fold to the back side. Fold to the front side.
45