OPERATING THE CONTROLS FOR TILLING
If the tines dig in but the machine will not move forward, move the
handlebars from side-to-side. When turning, push down on the
handlebars to bring the tiller's weight to the rear; this will make turning
easier.
Handlebar Height Adjustment
Stop the engine before adjusting
the handlebar height.
To adjust the handlebar height,
loosen the handlebar height
adjuster, select the appropriate
holes, and tighten it.
Clutch
When the clutch lever is
squeezed, the clutch is engaged
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged and power is
not transmitted.
OPERATION
HANDLEBAR
HEIGHT
ADJUSTER
CLUTCH LEVER
19