[File Server] Tab - Sony HVO-500MD Instruction Manual

[Obtain an IP address automatically]
In the [Obtain an IP address automatically] screen that
appears, select [Use] to use the DHCP to obtain an IP
address automatically, or select [Not Used] to assign a
static IP address manually, and then press the ENTER
button.
If you select [Use], the IP address, subnet mask, and
default gateway will be displayed as read-only.
If you select [Not Used], be sure to configure the [IP
Address], [Subnet Mask], [Default Gateway],
[Preferred DNS Server], and [Alternate DNS Server]
settings.
[IP Address]
Enter the IP address using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 26).
[Subnet Mask]
Enter the subnet mask using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 26).
[Default Gateway]
Enter the IP address for the default gateway using the
on-screen keyboard.
If you are only using a local network and not
connecting to other networks, do not configure this
setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 26).
70
Network Settings
[Obtain DNS server address automatically]
In the [Obtain DNS server address automatically]
screen that appears, select [Use] to obtain the IP
address for the DNS server automatically, or select
[Not Used] to specify the IP address manually, and
then press the ENTER button.
If you select [Not Used], be sure to configure the
[Preferred DNS Server] and [Alternate DNS Server]
settings.
[Preferred DNS Server]
Enter the IP address for the preferred DNS server
using the on-screen keyboard.
If you do not have nor need a preferred DNS server, do
not configure this setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 26).
[Alternate DNS Server]
Enter the IP address for the alternate DNS server using
the on-screen keyboard.
If you do not have nor need an alternate DNS server,
do not configure this setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 26).
5
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Network Settings], use
the V , v , B , and b buttons to select [Apply], and press
the ENTER button to save the configurations.

[File Server] Tab

Configure these settings when specifying a server as the
storage location for recorded data.
1
Use the B and b buttons to select the [File Server] tab.