Inserting And Removing Discs - Sony HVO-500MD Instruction Manual

Cleaning
• Clean the disc with a soft cloth, wiping it from the center
out. If the dust is heavy, wipe it with a soft cloth
moistened with water, then wipe off the water with a dry
cloth.
• Do not use solvents such as benzene, thinner,
commercially available record cleaners, or anti-static
spray. Using these products may damage discs.

Inserting and Removing Discs

To insert a disc
1
Press the 1 (on/standby) switch to exit standby mode.
1 (on/standby) switch
"WELCOME" appears on the front panel display.
When the "READY" message appears, proceed to the
following steps.
2
Press the Z EJECT button.
The disc tray opens.
28
Handling Discs
3
Insert the disc.
4
Gently push in the disc tray.
The disc tray closes.
When an incompatible disc is inserted
The DVD indicator lights orange, and a message notifying
you of the incompatible media appears on the menu screen.
Remove the disc, and insert a compatible disc.
To remove a disc
1
Press the Z EJECT button while the unit is turned on.
The disc tray opens.
2
Remove the disc.
3
Gently push in the disc tray to close it.
Tips
• The disc tray may take some time to open if
• The disc tray cannot be opened while recording is in
Z EJECT button
Data side facing down
finalization is in progress. Wait a moment for the
finalization process to complete.
progress or paused when simultaneously saving to a
DVD.