[File Server] Tab; [Ntp] Tab - Sony HVO-500MD Instructions For Use Manual

For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
[Alternate DNS server]
Enter the IP address for the alternate DNS server using
the on-screen keyboard.
If you do not have nor need an alternate DNS server,
do not configure this setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
5
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Network Settings], use
the V , v , B , and b buttons to select [Apply], and press
the ENTER button to save the configurations.

[File Server] Tab

Configure these settings when specifying a server as the
storage location for recorded data.
1
Use the B and b buttons to select the [File Server] tab.
2
Use the V and v buttons to select the [Server] box, and
press the ENTER button.
The [Server] screen appears.
3
Use the V and v buttons to select [Common Setting
(Share)], and press the ENTER button.
Settings items for common setting (share) server
appear.
4
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Server Name]
Enter the server name using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
[Share Name]
Enter the share name using the on-screen keyboard.
Use only alphanumeric characters and symbols
(excluding " = / \ [ ] : | < > + ; , ? *).
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
[User Name]
Enter a user name using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
[Password]
Enter the password using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
5
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Network Settings], use
the V , v , B , and b buttons to select [Apply], and press
the ENTER button to save the configurations.

[NTP] Tab

Configure these settings to obtain the current time from the
NTP server.
1
Use the B and b buttons to select the [NTP] tab.
2
Use the V and v buttons to select the [NTP] box, and
press the ENTER button.
85
Network Settings