Advertisement
ADDITIONAL SAFETY RULES FOR CHARGER
1. The Makita charger Model
DC122 is specifically designed t o charge only
the Makita battery 121 or
122.
Do not attempt t o charge any other battery
with this charger.
2. Handle the charger carefully. Do not drop or strike
it.
3.
Never carry the charger by cord or yank it t o disconnect from receptacle.
4.
Keep cord from heat, oil, chemicals, and sharp edges.
5. Use only a power source of the same voltage as indicated on the nameplate
6. Do not attempt t o use a step-up transformer, an engine generator or DC
7. Charge the battery at a room temperature of 10°C (5OOF)
-
4OoC (104OF).
8.
Do not charge in place exposed t o direct sunlight.
9.
Do not allow the charger t o get wet.
I O .
Do not charge inside a box or container of any kind.
11. Do not charge near volatile, flammable material such as gasoline, paint, gas,
12.
Do not charge on top of paper, carpet, vinyl sheeting, cloth materials, etc.
13.
Do not allow anything t o cover or clog the charger vents. Do not attempt
14. Do
not charge in dusty place.
15. Stop charging immediately if you notice anything abnormal. Ship or take the
charger and the battery t o your nearest Makita Service Center or Distributor
for checking them.
of the charger when charging.
power receptacle.
adhesive, etc.
t o insert anything into the vents.
16. Do not attempt t o disassemble or make modifications t o the charger.
17. Do not put any metal objects
or
foreign matter into the inlet of the charger.
Short-circuit will occur, causing a burn injury and charger breakdown.
SAVE THESE INSTRUCTIONS.
6
Advertisement
