Switch Action; Installing Or Removing Abrasive Belt; Functional Description; Assembly - Makita 9924DB Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Lock button
2. Switch trigger

ASSEMBLY

1
1. Lever
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

003367
1
CAUTION:
2
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

Installing or removing abrasive belt

003374
Pull the lever all the way out and install the belt over the roll-
ers, then return the lever to the original position.
CAUTION:
• When installing the belt, make sure that the direction of
the arrow on the back of the belt corresponds to the one
on the tool itself.