Makita 9901 Instruction Manual
Hide thumbs
Also See for 9901:
- Instruction manual (37 pages) ,
- Parts breakdown (3 pages) ,
- Instruction manual (16 pages)
Table of Contents
Related Manuals for Makita 9901
Summary of Contents for Makita 9901
-
Page 1: Belt Sander
Belt Sander MODEL 9901 MODEL 9924DB MODEL 9401 MODEL 9402 003360 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. -
Page 2: Specifications
These values have been obtained according to together with household waste EN60745. material! For Model 9901 For European countries only In observance of European Directive 2002/96/EC on waste electric and Noise and Vibration electronic equipment The typical A-weighted noise levels are... -
Page 3: General Safety Rules
We declare under our sole responsibility that this product 8JD, ENGLAND is in compliance with the following standards of stand- Responsible manufacturer: ardized documents, EN60745, EN55014, EN61000 in Makita Corporation Anjo Aichi Japan accordance with Council Directives, 89/336/EEC, 98/37/ Yasuhiko Kanzaki CE 2005 Director GENERAL SAFETY RULES... -
Page 4: Specific Safety Rules
24. Follow instruction for lubricating and changing attached to a rotating part of the power tool may result in personal injury. accessories. 13. Do not overreach. Keep proper footing and bal- 25. Keep handles dry, clean and free from oil and ance at all times. -
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 003365 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”... -
Page 6: Dust Bag
003377 CAUTION: • When installing the belt, make sure that the direction of the arrow on the back of the belt corresponds to the one on the tool itself. Adjusting belt tracking 003381 While the belt is running, use the adjusting knob to center the belt tracking. Failure to do so can result in frayed belt edges and wear on the sander frame. -
Page 7: Replacing Carbon Brushes
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 8 Makita Corporation Anjo, Aichi, Japan 883836D226...