Table of Contents
Advertisement
FUNCTIONAL
DESCRIPTION
1
2
1. Switch trigger
2. Lock button
1. Reversing switch lever
6
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003014
CAUTION:
•
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
•
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
Reversing switch action
003024
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the "FWD" posi-
tion for clockwise rotation or the "REV" position for counter-
clockwise rotation.
1
When the reversing switch lever is in the neutral position, the
switch trigger cannot be pulled.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
•
Pulling the trigger hard when the reversing switch lever is
in the neutral position can cause switch breakage.
Hide quick links:
Advertisement
Table of Contents
