Electric Brake - Makita LS711D Instruction Manual

ASSEMBLY
3
1. Arm
2. Wrench holder
3. Socket wrench
14
• Do not pull the switch trigger hard without pressing in the
lock-off button. This can cause switch breakage.
To prevent the switch trigger from being accidentally pulled, a
lock-off button is provided. To start the tool, press in the lock-
off button and pull the switch trigger. Release the switch trig-
ger to stop.
WARNING:
• NEVER use tool without a fully operative switch trigger.
Any
DANGEROUS and must be repaired before further usage.
• For your safety, this tool is equipped with a lock-off
button which prevents the tool from unintended starting.
NEVER use the tool if it runs when you simply pull the
switch trigger without pressing the lock-off button.
Return tool to a Makita service center for proper repairs
BEFORE further usage.
• NEVER tape down or defeat purpose and function of
lock-off button.

Electric brake

This tool is equipped with an electric blade brake. If the tool
consistently fails to quickly stop blade after switch trigger
release, have tool serviced at a Makita service center.
The blade brake system is not a substitute for blade guard.
NEVER USE TOOL WITHOUT A FUNCTIONING BLADE
GUARD. SERIOUS PERSONAL INJURY CAN RESULT.
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Socket wrench storage
002200
1
The socket wrench is stored as shown in the figure. When
2
using the socket wrench, pull it out of the wrench holder.
After using the socket wrench, return it to the wrench holder.
tool with an inoperative switch is HIGHLY