Makita 6305 Specifications page 2

850W Heavy Duty Motor
850W Heavy Duty Motor
Drill
6305
Double Insulation
Continuous rating Input
Capacity Steel:
Wood:
No load speed
Dimensions
(L x W x H)
Net weight
Power supply cord
Standard equipment : Chuck key, Depth gauge, Grip 36 complete
Warning Lamp
Externally Accessible
Brushes
850W Heavy Duty Motor
Neck Diameter : 43mm
Designed for installation on Type-43 drill stand.
850W
13mm (1/2")
30mm (1-3/16")
1,300 rpm
346 x 84 x 152mm
(13-5/8" x 3-5/16" x 6" )
2.6kg (5.7lbs)
2.5m (8.2ft)
3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan
Rear Handle with
Soft Rubber Grip
Ergonomically
designed for
comfortable operation
Portable Drill
Press Attachment
helps to keep the drill
position stable and to
drill smoothly with
leverage.
Comes with 6305W as
standard equipment.
Performance data
Comparison of Drilling Speed
Wood drilling
Test conditions : Drilled through holes
in 90mm deep Douglous-fir plate with
30mm diameter auger bit.
Makita
110
6305
Makita
100
6301
Competitor
75
"H"
Competitor
75
"R"
slow 60 80 100 fast
Numbers in the charts above are relative values when the capacity of Makita 6301 is indexed at 100.
Note: The test results depend on the kind of material to a great extent.
Potable Drill Press 6305W
303
Double Insulation
Continuous rating Input
Capacity Steel:
No load speed
Dimensions
(L x W x H)
Net weight
Power supply cord
Standard equipment : Portable Drill Press attachment, Lever complete,
Accessory set, Stand base, Chuck key, Grip 36 complete
Items of standard equipment and specifications may differ from country to country.
Metal drilling
Test conditions : Drilled through holes
in an SPCC plate with 13mm drill bit.
Makita
100
6305
Makita
100
6301
Competitor
60
"H"
Competitor
70
"R"
slow 60 80 100 fast
303
850W
13mm (1/2")
1,300 rpm
541 x 84 x 152mm
(21-1/4" x 3-5/16" x 6" )
4.9kg (10.8lbs)
2.5m (8.2ft)
PRINTED IN JAPAN Z15202-2 2006-02