Preparing The Vehicle Mounted Dock For Use; Quick Start - Vehicle Mounted Dock - Honeywell Marathon Reference Manual

Preparing the Vehicle Mounted Dock for use

The powered vehicle mounted assembly should be secured to an area in the vehicle where it:
Does not obstruct the driver's vision or safe vehicle operation .
l
Will be protected from rain or inclement weather.
l
Will be protected from extremely high concentrations of dust or wind-blown debris.
l
Can be easily accessed by a user seated in the driver's seat while the vehicle is not in operation.
l

Quick Start - Vehicle Mounted Dock

The following list outlines, in a general way, the process to follow when preparing the Marathon vehicle mounted dock for use.
Refer to the following sections in this document for more details.
1. Attach the RAM base
2. Attach the RAM arm assembly to the vehicle mounting assembly.
3. Attach the vehicle dock assembly to the RAM arm.
4. Adjust the Marathon to the best viewing angle while secured in a vehicle dock.
5. Connect antenna. Note: The vehicle remote mount antenna cannot be used by devices with an internal antenna.
6. Connect peripheral
7. Secure the power connector from the vehicle mounted power supply to the Power port.
8. Secure all cables in
The Marathon in the powered vehicle mounted assembly is ready for use.
Attention
This product is connected to a fuse box in the passenger compartment before it is connected to the vehicle battery, and the
fuse in the fuse box is UL listed and an automotive fuse.
Use the appropriate flexible and SAE wiring to connect to a fuse box.
This product is installed in the passenger compartment.
This product must be installed and maintained by qualified service personnel.
3-2
vehicle mounting assembly to the vehicle.
cables.
strain relief cable clamps.