Connect Power Supply To Vehicle Mounted Dock - Honeywell Marathon User Manual

Connect Power Supply to Vehicle Mounted Dock

Note: The vehicle cradle is designed for nominal 12V and 24V, negatively gounded vehicles only.
1. Align the connector pins to the vehicle dock Power port; firmly pushing the connector into the Power port.
2. Tighten the plug clockwise until the power cable is securely fastened.
3. Secure the cable to the dock with the installed strain relief cable clamp.
The Power LED on the front of the vehicle dock illuminates when the dock is connected to vehicle power.
The power LED on the Marathon illuminates when it is receiving external power from the vehicle dock.
Refer to the Marathon Dock Reference Guide for further information and instruction.
3-6