Connect Cables; Power Port; Serial Monitor Port; Usb Ports - Honeywell Marathon Reference Manual

Hide thumbs Also See for Marathon:

Table of Contents

Connect Cables

Note:

Route all cables to ensure they are protected from jostling, tugging or being disconnected by passing objects.

Insert the dock end of the AC adapter cable assembly in this port. The Power LED on the front of the dock illuminates when the

dock is receiving AC power.

An external serial monitor cable can be connected to this port.

The Marathon dock has four USB 2.0 ports, two on the front of the dock and two on the rear of the dock. USB ports on the dock

support hot swapping.

A standard RJ45 Ethernet connector is located on the back of the dock. Connecting an Ethernet cable to this port provides a

Gigabit Ethernet connection. When a LAN connection is made via cable, the appropriate LAN LED on the front of the dock is

illuminated. A second LAN LED indicates LAN activity.

2-5

Table of Contents