Connect The Ring And Battery Cables; Battery - Honeywell HX3 User Manual

Connect the Ring and Battery Cables

The battery cable and the ring scanner/imager cable should not be exchanged or replaced in a dirty, harsh or hazardous
environment. When the tethers are disconnected, any dust or moisture that adheres to the tether connector can potentially
cause damage upon cable re-connection.

Battery

Note: The HX3 cannot function unless a battery is securely tethered. Be sure to place the HX3 in Suspend mode before
disconnecting a battery, or all unsaved data may be lost.
When you want to switch connectors from left to right, or vice versa, first gently press downward on the Retaining Clip, then
pinch and pull the cable connector (not the cable!) straight up and away from the HX3. Do not use a metal object, or extreme
force, to remove the cable connector from the HX3.
Re-connect cables and reassemble the HX3 body-worn components.
1. Connect
2. Armband Right Arm
3. Armband Left Arm
4. Press Down
5. Remove
2-3