Table of Contents
Advertisement
Administrating the Device
To turn on or off the Power LED (wireless LED if WLAN model).
Log:
User can check the system log information of the device, including the Main Info, Appended
Info, Operator IP, and so on ...
Reload:
Click this button; user can refresh the log information of the device.
Date & Time
You can setup the device or make it synchronized with PC or remote NTP server. Also, you
may select your time zone in order to synchronize time locally.
Server Date & Time:
Displays the date and time of the device.
PC Time:
Displays the date and time of the connected PC.
Adjust:
- Synchronize with PC:
Click this option to enable time synchronization with PC time.
- Manual setting:
Click this option to set time and date manually.
- Synchronize with NTP:
Click this option if you want to synchronize the device's date and time with those of time
server called NTP server (Network Time Protocol).
NTP Server: Type the host name or IP address or domain name of the NTP server.
NTP sync. Interval: Select an interval between 1 and 24 hours at which you want to adjust
the device's time referring to NTP server
Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is installed.
Daylight Saving:
Disable or enable the daylight saving adjustment.
44
Advertisement
Table of Contents
