Honeywell 720P User Manual page 33

Ir vandal dome camera
Hide thumbs Also See for 720P:
Table of Contents

Advertisement

Honeywell
MAC address:
Displays the Ethernet MAC address of the device. Note that user can not modify it.
Obtain IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP address
assignment. With this setting, the IP address is assigned automatically. If this device cannot
get an IP address within limited tries, the device will assign a default IP address,
192.168.0.100, by itself as the default IP address.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.
Obtain DNS from DHCP:
DNS: Stands for Domain Name System.
Enable this checked box when a DHCP server is installed on the network and provide DNS
service.
Primary DNS and Secondary DNS:
If you do not select Obtain DNS from DHCP, then you need to enter these parameters
manually.
HTTP Port:
The device supports two HTTP ports. The first one is default port 80 and this port is fixed.
This port is very useful for Intranet usage. The second HTTP port is changeable. Users could
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

720d1

Table of Contents