Install The Camera In Lan - Honeywell 720P User Manual

Ir vandal dome camera

Hide thumbs Also See for 720P:

Table of Contents

5 Install the Camera in LAN

Plug an Ethernet cable into the Camera

Connect an Ethernet cable to the LAN socket and attach it into the network.

Connect the external power supply to Camera, if not powering by PoE

Connect the attached power adapter to the DC power jack of the camera.

Note: Use the power adapter, 12VDC, included in the package and connect it to wall outlet

for AC power.

Once you have installed the camera well and powered it on, the Power LED (orange) will

turn on later. The Power LED turned on, it means the system is booting up successfully.

Furthermore, if you have a proper network connection, and access to the camera, the LAN

LED (green) will flash.

Honeywell

Table of Contents

720d1